Front Runner 40"/ 1016mm LED Flood/Spot Light Bar.
Click HERE for fitting light bar instructions.
Click HERE for bracket fitting instructions
- 40 Inch Dual Row LED Light Bar features approximately 19,200 lumens.
- Combination of 8 degree narrow spot beam pattern for focusing on long range distances AND 120 degree wide flood beam pattern for close but wide range illumination immediately surrounding the vehicle.
- The aluminum housing is waterproof, dustproof and rattle proof. Built for Off-Road performance in harsh outdoor conditions.
- Expected LED life of 30,000 hours.
- Mounts to the front of a Slimline II Roof Rack via the T-slots of the front combined slat profile OR under the Rack using included mounting bracket solutions.
- Mounting brackets are made of 3CR12 stainless steel and sealed with the same durable, weather resistant black powder coating as the Front Runner Slimline II Roof Racks.
- The robust light shield protects the 40 inch LED Light Bar from small rocks and can rotate 100 degrees not braking the beam pattern when the light is in use.
- The light shield can additionally control light fall and prevent excessive glare on the vehicles hood/bonnet.
- Optional Wiring Harness available (see ECOM103)
- Includes all installation hardware and fitting instructions.
PLEASE NOTE: A minimum of 90mm (3.54 inches) clearance is needed between the bottom of the Front Runner Rack and the vehicle's roof in order to fit this product using the under rack brackets.
1 x 40" LED Light Bar (Multi Beam with Spot & Flood)
1 x Set of Front Rack Mount Brackets
1 x Set of Under Rack Mount Brackets
1 x Protective Front Cover
Black powder coated 3CR12 stainless steel
1110mm (43.7") L x 117mm (4.6") W x 78mm (3.1") H
40 Inch Dual Row
Input Voltage: 9-32 Volts DC
Power Consumption: 240 Watts / 16 Amp at 12 Volts
80 High Intensity CREE LEDs
Color Temp: 6000k
Lumen Output: Approx. 19,200lm
Beam Pattern: 8 Degree Spot Combination Flood
Protection: Over / Under Voltage protection
Reverse polarity protection
Housing Material: Aluminum extrusion
Mounting End Pieces: Die cast aluminum alloy
Lens Material: High Light Transmission Polycarbonate
|Fits Vehicles||Series, Defender, Discovery 1, Discovery 2, Discovery 3&4, RR Classic, RR P38, RR L322, RR Sport, Evoque, Jeep|
Delivery & Returns
We are proud to offer a 100% Satisfaction Guarantee 30-Day Risk Free Return Policy
We are confident you will be happy with your purchase. If for any reason the product does not meet your expectations, you may return it in its original condition with all original packing materials within 30 calendar days from the shipment date for an exchange or full refund of your purchase price, excluding shipping costs.
Please inspect your order immediately upon arrival. Do not dispose of the box or any packaging materials until you have inspected your order and are satisfied with the product you have received.
By Aziz on 18/06/2018
Without any exaduration one of my best purchasing experiences with regards to process time, dispatch and delivery. In addition to that, the packaging was excellent as well. Thank you very much.