XDC
The Warn XDC has a 9,500 lb (4,310 kg) line rating and an extreme duty cycle for long pulls. The XDC also features a thermometric protection device to ensure long motor life by suspending winch operation if the motor's temperature becomes elavated beyond it's normal operating range.
For resistance to the elements, the XDC has additional sealing and full-face contact drum seals.
Other features include a Gen II, Series Wound™ motor; a control box with a water resistant contactor; a high-gloss, chip-resistant powder-coated finish over chromate coating for superior corrosion resistance; and a multi-segment cam-actuated brake for positive operator feedback while winching. Also included is a remote control with a 12' (3.7m) lead with a built-in torch.
| XDC International SPECS |
| Part Number: PN 74700 (12V DC) |
| Rated Line Pull: 9500 lbs. (4310 kgs.) single-line |
| Motor: Gen II, Series WoundTM |
| Remote Control: Remote switch, 12' (3.7m) lead, with integrated flashlight |
| Geartrain: 3-Stage Planetary |
| Clutch (freespooling): Sliding Ring Gear |
| Brake: Automatic Direct Drive Cone |
| Drum Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 87 lbs. (39.5kgs.) |
| Wire Rope: 100', 5/16" diameter (30m, 8mm diam.) |
| Fairlead: Roller |
| Battery Leads: 2 gauge, 72" (1.83m) |
| Finish: Chromate with high-gloss powder coat |
| Nuts/Bolts: PN 39570 |
|
WIDTH
|
DEPTH
|
HEIGHT
|
|
(555mm) 21.8"
|
(160mm) 6.3"
|
(193mm) 7.6"
|
|
