PowerPlant HP
GO PREPARED - SELF CONTAINED
When you're on the trail, you want to be self sufficient and make the most of your time; the PowerPlant Dual Force HP lets you do that. No more relying on a makeshift air compressor to inflate tyres; gone are the days of time-consuming tyre inflation. Now you can inflate tyres in a matter of minutes. You can also operate air tools, such as an impact wrench, letting you change a tyre wherever the PowerPlant Dual Force HP goes. If you're an outdoor enthusiast, you'll love the unit's ability to rapidly inflate rafts, air mattresses, or anything else that requires air.
TACKLE THE TRAILS
Tackle the toughest trails with confidence knowing the PowerPlant Dual Force HP has been optimized for off-road use. The winch has 9,500 lbs. of pulling capacity and fast line speeds, ensuring you'll quickly get out of tough situations. Plus, the winch's thermometric switch prevents overheating, so you'll always make it home.
| Air flow rating: 12 CFM @ 0 psi, 5 CFM @ 90 psi |
| Max air pressure: 100 psi |
| Rated Pull: 9,500 lbs. single line |
| Motor: Series Wound 4.6 hp 12V |
| Remote Control: Hand-held remote control with thermometric indicator |
| Geartrain: 3-Stage planetary |
| Gear Ratio: 156:1 |
| Clutch: Sliding ring gear |
| Brake: Automatic direct drive cone |
| Drum Diameter/Length: 2.5"/9.0" |
| Wire Rope: 125' of 5/16" |
| Fairlead: Roller |
| Finish: High gloss, powder coat finish over chromate coating |
| Weight: 100 lbs |
| |
12V DC Performance Data: |
| |
| |
Load (lbs.) |
Current (amps) |
Speed (fpm) |
| |
| |
9,500 |
475 |
5 |
| |
| |
9,000 |
454.5 |
5.2 |
| |
| |
8,000 |
419.9 |
6.1 |
| |
| |
6,000 |
344.9 |
7.8 |
| |
| |
4,000 |
261.8 |
10.3 |
| |
| |
2,000 |
194.6 |
14.6 |
| |
| |
0 |
87.7 |
26.9 |
A - Compressor
High output- 5 CFM @ 90 PSI
B - Intercooler/Air Reservoir
Reduces compressed air temperature. Helps extend the life of the air hose. 1/2 gallon reservoir helps even air flow.
C - Pressure Switch
Limits maximum/minimum air pressure in reservoir.
D - Contactor
Sealed and weather resistant. Highly reliable contacts handle high current and allows for long duty cycles.
E - Thermal Protection Switch
Protects motor from overheating.
F - Series Wound Motor
Gen II motor delivers the power to drive both the winch and compressor.
G - Mechanical Brake
Provides reliable operator control when winching.
H - Wire Rope
Long length of 80 feet(HD) or 125 feet (HP)
I - Air Outlet/Hose Connection
Works with quick-connect coupler.
J - Winch Sealing System
Provides superior water resistance.
K - 3-Stage Planetary Gear Train
Most reliable and efficient gear reduction system available. |
.JPG)
