Porta-Pull2 is our professional portable winch system. It is designed for heavier uses, such as self-recovery or vehicle recovery lorries. 

The main benefit of this system over a fixed vehicle mounted winch is that it can be used on both the front and the back of your vehicle if you have a tow hitch fitted at both ends. These systems simply drop on to tow ball. With extra vehicle wiring kits it can also be used on any number of other vehicles.

Porta-Pull2 can be safely and securely stowed in the vehicle. Using it is simply a case of grabbing the winch, dropping it on the tow hitch, sliding in the security pin and snapping the quick-connect plug into the supply cable plug. The remote control means that you can always be in the right position to oversee the winching. The long wire rope is long enough to reach an anchor point or to lower trailers down slipways etc. The winch is free to rotate on the ball so it will always face the direction of the pull, so there is no risk of the rope bunching up at one end of the drum as with fixed winches. It can also be used with a wireless remote control if required.

  
The Porta-Pull systems are supplied ready to fit. The supply cables can be supplied with either heavy duty crocodile clips for connecting straight on to a battery, or with ring terminals to permanently connect the supply cables for regualr use.

The whole system comprises of :-

CHAMPION TDS9500 Winch
Porta-Pull2 Winch Mount
Roller Fairlead
30metre Wire Rope
Remote Control
Wiring Kit with Quick-Connectors
Pulley Block
Hand-Saver Strap

Winch Specifications

Rated Pull Line 9500lb (4039kg)

5hp /3.4kw Series Wound Motor

Gear Reduction 173:1

Drum Size 63.5mm x 229mm

NO LOAD SPEED 60ft/min

Mounting Pattern 254mm x 114.3mm

Weight 38kg

We also supply the winch in a 24volt version.