Porta-Pull1 is probably our most versatile winch system.
 

Porta-Pull1 was developed initially for launching boats and jetski’s, but it’s just as useful for moving larger trailers or caravans. The other main use is for vehicle self-recovery. The main benefit of this system over a fixed vehicle mounted winch is that it can be used on both the front and the back of your vehicle if you have a tow hitch fitted at both ends. The 6000lb winch with its 3.2hp motor has enough pulling power for drive-assist recovery, or for almost any other job where a winch is useful. It can be simply dropped on to a tow ball or used with a ring hitch or even a NATO hitch.
 

Though not quite as powerful as our fixed recovery winches there are many other advantages over a fixed winch. Porta-Pull1 can be safely and securely stowed in the vehicle. Using it is simply a case of grabbing the winch, dropping it on the tow hitch, sliding in the security pin and snapping the quick-connect plug in to the supply cable plug. The remote control means that you can always be in the right position to oversee the winching. The 80’ (24metre) long wire rope is long enough to reach an anchor point or to lower trailers down slipways etc. The winch is free to rotate on the ball so it will always face the direction of the pull, so there is no risk of the rope bunching up at one end of the drum as with fixed winches.

We also supply the winch in a 24volt version.

DV-6000s Porta-Pull Winch

Winch Features 

• Heavy duty series wound motor gives high torque and fast line speed
• Detachable solenoid pack mounted elsewhere on the vehicle
• 3-stage planetary gears for higher efficiency
• The US, German and UK patented cone load-holding brake to securely hold the load
• Rotating ring gear clutch for free spooling